Mackissic root cutter
1.5 CF sand blaster mach dished w/ 66evd
The TILT-LOK™ handle on Milwaukee's 6390-20 is the most revolutionary concept for circular saws in years. The eight position cushioned top handle adjusts to any cutting application maximizing comfort and control. Weighing in at 10.4 pounds and delivering 3.25 maximum horsepower, this tool offers the best power to weight ratio in the industry. The blade can bevel to 50 degrees and offers superior visibility and a clear sight line from either side. Helical steel gears and a 22 amp switch are just two of the features that ensure the Milwaukee's reputation for durability.
Key Features
New exclusive TILT-LOK™ main handle adjusts to the work or most comfortable work position
15 amp, 3.25 peak horsepower motor - most powerful circle saw cuts tough materials including headers, microlams and wet lumber with ease
10.4 pounds net weight - lightest 7-1/4 inch, 3.25 maximum horsepower saw reduces operator fatigue, easier to handle
Wide, clear sight line - superior blade visibility from either side
The 6955-20 12" Dual-Bevel Sliding Compound Miter Saw offers best in class accuracy, power and ease of use. The Miter Angle Digital Readout provides repeatable accuracy to 0.1°. The Miter Angle Fine Adjust with Detent Override makes it simple to dial-in precise miter angles. Dual Integral Jobsite Lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start maintains constant cutting speed under load and decreases start up head movement. The Integral Dust channel captures up to 75% of the dust and debris cut.
The M18 FUEL™ Band Saw cuts faster than its corded counterparts, provides the same legendary durability of a Milwaukee corded band saw and delivers up to 2X more run time than other cordless options. Utilizing a POWERSTATE™ Brushless motor and Constant Power Technology™, the M18 FUEL™ Deep Cut Band Saw cuts faster than corded band saws. It also delivers the same legendary durability that has made Milwaukee Corded Deep Cut Band Saws second to none for decades by utilizing over 90% of the same parts. Equipped with Jobsite Armor Technology™, the tool is better protected from drops and debris with a proprietary composite material and crush zone barriers to absorb impacts. REDLITHIUM™ XC5.0 Battery Technology provides up to 2.5X more run-time through superior pack construction, electronics, and more work per charge over the life of the battery than any competitive lithium-ion battery on the market.
Built to perform, the 11 amp Milwaukee Sawzall Plus® Reciprocating Saw delivers more power than previous models rated at 8.5 amps. This Sawzall features a QUIK-LOK™ blade clamp for fast, easy blade replacements. A full 1-1/8 in. blade stroke and variable speed up to 2800 strokes per minute provide efficient cutting of any sawable material. A heavy-duty steel wobble plate mechanism and ball and roller bearings provide the durability that you have come to expect from Milwaukee Sawzalls. A gear protecting clutch extends the life and guards against damage to the mechanism due to sudden jars from pinched blades. An externally accessible brush cap and a keyless adjustable pivot shoe provide the convenience that you have come to expect from Milwaukee. All wrapped up in an impact resistant carrying case that will not rust.
2 Inch Discharge, 115V 1Ø, 1.0 HP, 73 GPM, 37' Total Head
This lightweight, compact submersible centrifugal pump is ideal for moving water in multiple confined and open area applications. This is a powerful, versatile, low maintenance pump that is perfect for a wide range of operations supporting Contractors, Service Utilities, Municipalities, and Homeowners. Further, the ST2037 incorporates a rugged cast aluminum housing, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller and molded 25’ Power Cable with strain relief. Model ST2037F is available that provides a tethered industrial mechanical float switch assembly.
1.0HP, 115V/9.8A, 1Ø, UL & CUL Listed Electric Motor.
Built-in Overload Protection.
2" (NPT) Female Discharge Port.
Reliable double mechanical oil-filled seals.
Cast iron/steel motor casing serves as heat conductor.
Pumps Liquid Up To 120° F.
25’ of molded power cord w/strain relief
Dewaters Flat Surfaces Up To 1/2" Levels.
2" Suction, Trash Pump, 172 GPM, 85 ft. MAX Head; 6.0HP KUBOTA OC-60-E4 Diesel
Compact, dependable industrial centrifugal trash pump that is the professional’s choice for the toughest dewatering applications. The signature Multiquip die-cast aluminum pump-end casings and high quality internal components provide the fastest priming times and trusted operational life. The pump is powered by an electric start, KUBOTA OC60-E4 diesel engine that provides EPA/CARB compliance design. This pump is the ideal choice for dewatering operations such as: excavations, flood waters, sewage by-pass, water transfer, and barge cleaning.
3" Suction/Discharge, Diesel Trash Pump, 325 GPM, 85 ft. MAX Head; 6.0 HP KUBOTA OC-60-E4
Dependable industrial 3" centrifugal trash pump that is the professional’s choice for the toughest dewatering applications. Capable of moving 1.5" spherical solids, this pump provides the signature Multiquip die-cast aluminum pump-end casings and high quality internal components provide the fastest priming times and trusted operational life. The pump is powered by an electric start, KUBOTA OC60-E4 diesel engine that provides EPA/CARB compliance design. This pump is the ideal choice for dewatering operations such as: excavations, flood waters, sewage by-pass, water transfer, and barge cleaning.
The PD 3 diaphragm trash pumps can move almost anything that flows. A 3-inch pump that can handle solids up to 1.625 inches (41 mm) and up to 88 gpm (333 l/min), these pumps are ideal for moving water with mud, slurries and in seepage areas. Built with high quality component, you will be assured of many years of top performance and durability. Large solid rubber tires provide excellent traction and smooth rolling over rough terrain.
18ga pneumatic floor nailer
16ga floor nailer w/ mallet and case
These are our "workhorse" wood tables perfect for all kinds of parties and events. The 60 inch rounds are very popular for dining events. The 36 inch rounds and the 48 inch rounds are often used to display the wedding cake at the reception.
Table Top Built with 3/4" Thick Russian Birch Wood Ply
"Blond" Color Table Top
6 Coats of Polyurethane Finish for Added Protection
Table 30 inches High ("Dining Height") When Set Up
Low Moisture Top for Longer Life and Better Service
Folding Legs are "Wishbone" Style
16 Gauge Steel Leg Tubing with Inserts to Protect Floor
Legs Lock into Place with Boss and Mate Mechanism
Bolt Thru Build Securely Attaches Runners & Legs to Top
3 Year Limited Warranty
SPECIFICATIONS:
Length: 60.00 inches
Width: 60.00 inches
Height: 30.00 inches
Weight: 59.00 lbs.
We evaluated the engineering of plastic folding chair manufacturers and took the best qualities of each to engineer our top quality commercial grade Plastic Folding Chair. Weighing in at a lightweight of just over 7.5 lbs, we use a real 18 gauge steel to ensure the sturdiness and reliability of this item. Three drain holes are drilled into the chair seat to stop rain water from accumulating; and the legs are set at the requisite angle. The side holes are placed 3/4" from the end and the plastic is reinforced around the side holes to ensure the plastic seat maintains its resiliency. The polypropylene seat and back are softened to avoid the brittleness that causes chair breakage in extreme cold and extreme heat.
We evaluated the engineering of plastic folding chair manufacturers and took the best qualities of each to engineer our top quality commercial grade Plastic Folding Chair. Weighing in at a lightweight of just over 7.5 lbs, we use a real 18 gauge steel to ensure the sturdiness and reliability of this item. Three drain holes are drilled into the chair seat to stop rain water from accumulating; and the legs are set at the requisite angle. The side holes are placed 3/4" from the end and the plastic is reinforced around the side holes to ensure the plastic seat maintains its resiliency. The polypropylene seat and back are softened to avoid the brittleness that causes chair breakage in extreme cold and extreme heat.
We evaluated the engineering of plastic fan back folding chair manufacturers and took the best qualities of each to engineer our top quality commercial grade Plastic Folding Chair. Weighing in at a lightweight of just over 7.5 lbs, we use a real 18 gauge steel to ensure the sturdiness and reliability of this item. Three drain holes are drilled into the chair seat to stop rain water from accumulating; and the legs are set at the requisite angle. The side holes are placed 3/4" from the end and the plastic is reinforced around the side holes to ensure the plastic seat maintains its resiliency. The polypropylene seat and back are softened to avoid the brittleness that causes chair breakage in extreme cold and extreme heat.
PRE’s resin folding chair, sometimes called a Garden or Wedding chair, is one of our most popular items ... and with good reason. It’s low-maintenance — no painting is ever needed—and attractive enough for any special event, whether indoors or outside. Not only is it a classic style, they are easy to handle, easy to maintain, easy to use. And they can support up to 1,000 lbs.!
PRE 8'x 30" wood table
Having a meeting or seminar? Our conference tables are the perfect set up for you. The 18 inch table width works well for this activity. It also works well as a display table for wedding gifts, catalogs, potted plants or anything else where you don't need a wide platform.
Table Top Built with 3/4" Thick Russian Birch Wood Ply
"Blond" Color Table Top
6 Coats of Polyurethane Finish for Added Protection
Table 30 inches High ("Dining Height") When Set Up
Low Moisture Top for Longer Life and Better Service
Folding Legs are "Wishbone" Style
16 Gauge Steel Leg Tubing with Inserts to Protect Floor
Legs Lock into Place with Boss and Mate Mechanism
Bolt Thru Build Securely Attaches Runners & Legs to Top
Perfect Table for Conferences, Seminars or Classrooms
3 Year Limited Warranty
SPECIFICATIONS:
Length: 72.00 inches
Width: 18.00 inches
Height: 30.00 inches
Weight: 34.00 lbs.
Polish, scrub and strip almost any floor, including uneven surfaces, with these single-speed (SS) and dual-speed (DS) floor machines. Deliver versatile cleaning power and chemical-free floor finish stripping with these heavy-duty, polyethylene floor machines.
Features
Excellent performance from heavy-duty 1.5 hp / 1.12 kW motors and pad drivers.
Easy-to-use twist grip operation with standard safety lock that helps protect operators and your facility.
Single or dual speeds with optional solution tank offer versatile cleaning performance.
60 dBA sound level on the FM-20-SS for quiet operation in sound sensitive areas.
SnapLock Dance Floors Teak dance floor has a rich, classic parquet with an authentic teak finish that’s as durable as the hardwood it draws its inspiration from. In addition to parties and events, the teak style flooring is perfect for walkways and other high-traffic areas.
TEAK DANCE FLOOR FEATURES:
Lightweight and easily portable - Only 18 lbs per 3' x 3' panel
All-weather surface - 100% Water resistant and designed for indoor and outdoor use
Industrial-grade top - Easy to clean and maintain
Installation is a snap - Simply "snap" together to form any size custom portable dance floor—no tools required
PowerLock interlocking technology - Panels stay connected
No Walk™ technology - Ensures your floor stays put all throughout your event
20-Year manufacturer’s warranty - Rest easy that your investment will last
Customizable - Available in Classic 12" modules
Made in the USA - Danced on worldwide
Made from the finest extruded magnesium available, MARSHALLTOWN Magnesium Bull Floats are lightweight and properly balanced to provide a professional, smooth finish. Choose between a round end or square end blade either with or without an adjustable RotaLeveler™ bracket. These concrete Bull Floats are 8" wide, come in a variety of lengths, and are Made in the USA with Global Materials.
Magnesium blade material is durable, long-wearing, and properly balanced
Pick your preferred blade length to suit your job size
All blades are 8" wide
Choose between a square end or round end blade
Available with or without a RotaLeveler™ bracket
Adjustable RotaLeveler™ bracket fits most 1 ⅜" and 1 ¾" push-button handles
6ft bull float handles
High Performance, Light & Compact Design and Quiet Operation are offered by Innovative Technology
Sturdy and Portable Construction
- Sturdy construction is realized by disposing a highly strong resin frame inside of enclosing cover made of resin and a highly strong plate made of aluminum as a bottom plate of frame.
- Thinner width of 290mm and large gripe possible to be handled by two persons realize superior carrying ability
Easy Operation
- Easy operation is achieved by intensively disposing all controls and adjusting knobs on a control panel.
- Employment of a one-dial switch controlling fuel cock, operating switch and choke system achieves easier operation as well as realizes prevention of omitting close of fuel cock and/or return of choke.